In this article, you will learn How you can install ZTE Blade V10 Telcel Firmware. So if you are in this article, then either your phone is working correctly. You might have tried to root it. However, if you do not like the custom ROMs you have installed and want to go back to the original operating system.
Anyway, all the solution to your problems with your phone is currently available in this article. You just need some material like ZTE Blade V10 Telcel Stock ROM, USB drivers, and flash tool that is in it.
ZTE Blade V10 Telcel Stock ROM – How To Flash Guide
The Advantages Of Stock ROM:
A Soft Brick or a Software Brick, is usually just when you’re Phone is stuck in a boot loop, and as the name implies, is caused by a software error. Usually the lack of a system to boot from or some other minor software bug that glitching boot.
They are easily fixable by flashing the stock ROM through recovery or with SP Flash Tool.
If your ZTE Blade V10 Telcel device turns to a soft-brick, it may:
- Keeps Rebooting;
- Boots Straight Into Recovery;
- Boots Straight Into its Bootloader;
- Freeze at the startup screen or boot Animation;
Pre-requirements:
Pls ZTE Q7 stock rom flashing file P839V50. Leakite September 25, 2017. Hi Williamz, ZTE Q7-C and Q7 use different firmware. The firmware you were previously. Listings for ZTE - ROMs ( 942 ) ZTE Blade A5 2019. ZTE Blade ROM Android 9.0. How To Flash ZTE Blade V10 Stock Rom Firmware Download the Stock Firmware on your personal computer. Install the USB MTK Drivers (skip if you have it already installed). Download and Launch the Smart Phone Flash Tool (SP Flash Tool). Avatecc zte ZTE Phones Stock Rom - Firmware - Flash File -Downloads ZTE Phones Stock Rom - Firmware - Flash File -Downloads zte Learn how to Flash ZTE Tabs, Mobile Phones with MTK, SPD, Qualcomm Chipset. ZTE Device USB Driver Download. Backup Your Device with ZTE PC Suite. Make a Backup of all your personal Data, before Flashing your Device, as this could help you fall back on its Prior Flashing State, if anything goes wrong. Always Flash with the right Stock Rom (Firmware, OS, Flash File) as Flashing a Phone with the wrong File Could be Fatal. Flashing your ZTE Device may void Tab or Mobile Phone Warranty.
- Supported Phone: ZTE Blade V10 Telcel
- Charge your mobile: You may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
ZTE Blade V10 Telcel Firmware Details:
- Device Name: ZTE Blade V10 Telcel
- Type: Full ROM
- SoC: Mediatek MT6771
- Os: Android 8.1
- Password: Null
- Root access: Not
- Gapps: Included
- Firmware Version: TEL_MX_ZTE_Blade_V10_V1.6 – TEL_MX_P671F20V1.0.0B21
| Download | Firmware/Flash File |
Instructions to Install ZTE Blade V10 Telcel Firmware:
Download the Sp Flash Tool and USB Drivers on your PC. Follow the below Guide to install the firmware using the Sp Flash tool.
Guide to Install Stock ROM using Sp Flash Tool:
Download the ZTE Blade V10 Telcel stock ROM zip file given above and extract it on your computer.
2. Download the USB driver and set up it on your computer. In case if in case you have already put in a USB driver in your computer skip this step.
3. Next, switch off your smartphone and take away the battery (it’s removable).
4. Now go to the extracted folder in Step 1 and open up the SP Flash Tool sub-folder. You will discover the “Flash_tool.exe” file in it. Launch it.
5. As soon as the SP Flash tool is launched, click on on “Download” tab.
6. Now, click on on “Scatter-loading” button within the download tab.
7. Next, click on on “Open Scatter File” and choose the scatter file from Step 1. For reference see the picture given under.
Zte Blade A512 Flash Rom
8. Now click on on the “Download” button to start the flashing process.
9. Next, join your Android device to your computer using the unique USB cable (without battery – whether it is battery removable) and press the volume up or volume down button.
Zte Blade A452 Flash Rom
10. The flashing process will start momentarily, and it’ll get accomplished in a minute or two.
As soon as it’s over, you will notice the “Download OK” green ring in SP Flash Tool.
11. Now, shut the SP Flash tool in your computer and unplug your smartphone.
That’s it. Now you’ve successfully flashed stock ROM firmware in your Android device.
Follow Detailed Instruction Stock Firmware Flashing With Sp Flash Tool.
Disclaimer:
- Please read and understand the Full Guide Before Flashing.
- Use these instructions at your own risk. We will not be responsible for everything that happens to you or your device, resulting from the use of information in this guide.
- Before flashing, Stock ROM must have a 70–80% charge.
Zte Blade A452 Firmware Flash Rom
Don’t flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones, you will have a brick even if you download these blocks read from a phone which you own!
Always remove from them marks in SPFT! ALWAYS have a working backup of your ZTE Blade V10 Telcel Firmware before you flash a new unknown ROM.